Δυνατότητα ενεργοποίησης 2 συσκευών μέσω τηλεφώνου.
- Προστασία από τυχαία ενεργοποίηση μέσω κωδικού.με εισαγωγή
κωδικού τον οποίο ο χρήστης μπορεί να τον αλλάξει εύκολα για περισσότερη
ασφάλεια
- Λειτουργεί με τονικό σύστημα dtmf
- Σύνδεση σε απλή ψηφιακή τηλεφωνική γραμμή με την οποία συνδέεται παράλληλα
- 2 ρελέ με επαφές ΝΟ ΝC
- Τροφοδοσία 12VDC/0,5Α.
Χειρισμός:
Μόλις απαντήσει η συσκευή εισάγουμε Default κωδικό 8888 Πλήκτρο 1 ενεργοποιεί την έξοδο ρελέ 1 Πλήκτρο 2 ενεργοποιεί την έξοδο ρελέ 2 Πλήκτρο 5 απενεργοποιεί την έξοδο ρελέ 1 Πλήκτρο 6 απενεργοποιεί την έξοδο ρελέ 2 ( # ) κλείνει την γραμμή τηλεφώνου Ρυθμίσεις: - Συνδέουμε την συσκευή παράλληλα με ένα τηλέφωνο
- συκώνουμε το ακουστικό και παταμε το πλήκρο set key (ενεργοποιείτε το ρελε γραμμής της συσκευής)
- πληκτρολογούμε τον κωδικό ΧΧΧΧMTΝΝ (οπου ΧΧΧΧ ο επιθυμητός κωδικός M πλήθος κωδωνισμών Τ τύπος λειτουργίας ΝΝ παράμετροι χρόνου λειτουργίας ) παράδειμα : 88889000
- πατάμε # και το πλήκτρο set key
Τύποι λειτουργίας παράμετρος Τ - 0 -κανονική λειτουργία ΝΟ ΝC ρελέ , χειρισμός απο τηλεφωνου της κατάστασης εξοδου
- 1-Το ρελέ 1 κανονική λειτουργία ΝΟ ΝC ρελέ , χειρισμός απο τηλεφωνου της κατάστασης εξοδου. Το ρελέ 2 ενεργοποιείτε για ορισμένο χρόνο που οριζει η παράμετρος ΝΝ (απο 01-99 sec)
- 2-Το ρελέ 2 κανονική λειτουργία ΝΟ ΝC ρελέ , χειρισμός απο τηλεφωνου της
κατάστασης εξοδου. Το ρελέ 1 ενεργοποιείτε για ορισμένο χρόνο που οριζει η
παράμετρος ΝΝ (απο 01-99 sec)
- 3-Το ρελέ 1 ενεργοποιείτε για ορισμένο χρόνο που οριζει η
παράμετρος ΝΝ (απο 01-99 sec). Το ρελέ 1 ενεργοποιείτε για ορισμένο χρόνο που οριζει η
παράμετρος ΝΝ (απο 01-99 sec)
Επαναφορά εργοστασιακών δεδομένων: Απενεργοποιούμε την συσκευή ,πατάμε το πλήκτρο set key συνεχόμενα και τροφοδοτούμε την συσκευή προσοχή η ενέργεια αυτή αποθηκεύει τον κωδικό ρυθμισης 88886101 στην συσκευή.
Phone Remote Control Operating Instructions
This phone is based remote control panel developed on the basis of an ordinary telephone line , you can achieve remote control of appliances in different areas of functionality. Two -way control this control panel is to provide a switching signal , this switch in series with the electrical power supply circuit inside, as and when the start switch directly connected to the start port.
Features:
- The password can be set :
- number of rings can be set ( 1 - 9 )
- each way operation mode ( normally closed or normally open start switch ) can be set
- As the operating time can be set when the start switch (1 - 99 seconds )
- Every road has a corresponding working status indicator shows
- motherboard power , passwords, and settings remain unchanged
- normally open normally closed all leads, easy to use
For safety , the control panel has four correct password in order to operate. Enter the wrong password 10 times in a row control panel automatically hang up the phone or stop automatically after 20 seconds to hang up the phone input ( hang up before the host sends 9 sound "DI" tone ) : The default password : 8888 ( can be modified ) , motherboard power , the password remains unchanged.
This control panel subject to an external DC 12V power supply , in order not to interfere with the phone line , the best step-down power transformer .
Operation:
Power on the motherboard , the motherboard "LL" indicator light goes out about , that has entered the operating states:
Connected to the control panel and then use a normal telephone line , ( crystal head directly into the telephone interface )
Call the telephone connection to the remote control panel , six sound after ringback ( varies depending on the setting , the default is 6 sound ) ,
Host switched telephone handset and type the password after "DIDI" twice prompted enter a password for each correct "DIDI" twice , the error "DIDIDI" three times, a mistake you can press "*" key to cancel and re- enter 4 digit password . There are 10 chances to enter a password ( press " *" key is also included ) , 10 times after host "DI" hang up the phone after 9 sound , you need to start over in order to operate the control panel ( This feature prevents the phone has been occupancy ) . When the phone is turned on the control panel must be entered within 20 seconds the first password, or automatic withdrawal ( 9 beeping sound ) 20 seconds after each time the button delay 20 seconds .
Once the password is entered correctly 4 , control panel "DIDIDIDI" tones , which means that you can start operation panel,
button 1: Open the first road , first road lights "CL1" lit control panel issued a "DIDI" twice.
button 2 : Open the second way , the second road lights "CL2" lit control panel issued a "DIDI" twice.
button 5 : Close the first road , first road lights "CL1" is off , the control board issued a "DI" three times .
button 6 : Close the second way , the second road lights "CL2" is off , the control board issued a "DI" three times .
The first path and the second path of action mode operates according to the setting , the default is the first road start switch mode, that action automatically restore one seconds later, the second road is normally open normally closed mode .
Enter the complete press the " #" key to confirm and exit or stop button automatically exit ( while loud voice prompts 9 ) 20 seconds later, do not press "#" key to long continuous input.
· Set two methods:
( A ) eight digits to be set introduced and strictly Click to enter , for example the default value ( continuous input )
88886101
Four rings- action mode password operation time
Four Password : four password when you start the control panel to set the default value of 8888 :
Vibration frequency : up to determine the actual number of rings in accordance with local , generally between 1-8 times beyond the control board may not be turned on after the call, input error is 0 times the system will automatically revert to a minimum of 1 second :
Action mode :
0 - Two representatives are normally open normally closed
1 - represents the first way to jog mode ( start switch mode ) , the second way is normally open normally closed ( default )
2 - represents the first road is normally open normally closed, the second way to jog mode ( start switch mode )
3 - Two representatives are inching mode ( start switch mode )
After entering the number more than three seconds , the system automatically set to 1 , the default value
Action time : 01 seconds after the resumption of action 1 , 02 seconds, two seconds ...... 12 to 12 seconds after the resumption , the maximum is 99 , ie 99 seconds after the resumption . This value is only set to start switching mode only effective way for normally open normally closed invalid
(B ) begin setting : Before this step , please set the value written on paper , to prevent input errors
Method 1 : The control panel connected to a phone line and give a normal telephone use ( to 2 holes ) , then picked up the microphone button click SET KEY motherboard , motherboard LL lights, figures can be explained at this time to set the number of days ( total of eight ) , the continuous input 8 digit press the # key to confirm , if the input error, you can re-enter after pressing the # key : Note If you enter more than eight digits , the first nine digits will cover the first input , the first 10 will cover the second digital ... , input errors can press the " # " key to re-enter : after pressing the # key to confirm the input information is correct, press the sET KEY button again to exit the setup .
Method 2: The phone line access telephone interface control panel , and then connect the host can normally make with another phone dial (phone or another line of fixed-line ) phone , when there is the first tone ringback Press the motherboard SET KEY button , turn on the phone motherboard , the following method of operation is the same one .
(C ) to restore the default settings
If the control panel appears when the control is not normal or is set incorrectly , you can restore the default settings control panel
Methods : First, to the control panel off , wait about 10 seconds and then press and hold the motherboard to control the SET KEY key electrical panel , after the bright lights until the button is released LL , LL et extinguished , then the default settings have been restored state, ie 88,886,101
Power and related parameters
Power supply voltage : DC 12V
Static current : <10mA
All the way to the power supply : <40mA
Two Action Power : <80mA
Single Load power : <1000W
Special note: Please this two-way control switch control panel in series in the electrical circuit inside : Please be removed from the control panel of the phone line when not applicable or power, so as to avoid unnecessary damage or affect the normal use of the telephone .
Glossary:
Start switch ( jog ) mode : the corresponding relay pull back off after a certain period of time , this period of time that is set in time 1 - 99 seconds :
Normally open normally closed ( locked ) mode : the state will remain after the relay until it receives instructions released.
|
![infocenter.gr:: electronic shop [home link]](includes/templates/template_default/images/logo.gif "infocenter.gr:: electronic shop [home link]"){kind=logo}
